Volkswagen Workshop Service and Repair Manuals > Polo Mk3 > Power unit | Diesel direct injection and glow plug system up to 09.99 | Self diagnosis, V.A.G Inspection Service | Measured value blocks | Evaluating measured value blocks, engine code AGD | Display group 007 with ignition switched on (engine cold and not running)

Display group 007 with ignition switched on (engine cold and not running)

Display group 007 -temperatures-
Read measured value block 7			→	▾ appears on display
xxx.x °C		xxx.x °C	xxx.x °C
1	2	3	4	▾ display zones	Specification	Evaluation
				Coolant temperature	Approx. ambient temperature → Note	→ Chapter
			Intake air temperature		Approx. ambient temperature → Note	→ Chapter
		No display
	Fuel temperature				Approx. ambient temperature → Note	→ Chapter

¹⁾	Details of temperature specifications are not possible. When the engine is cold the fuel, intake air and coolant temperatures must equate approximately to ambient temperature. If a temperature deviates noticeably, then the relevant sender must be checked.