volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Servicing injection part > < Mono-Motronic injection and ignition system
Mono Motronic injection and ignition system
Mono-Motronic injection and ignition system
Fitting locations overview
  • Activated charcoal filter solenoid valve 1 (N80)
    • ◆ Activated charcoal filter system

=> Repair group 20, removing and installing parts of the fuel supply system, removing and installing parts of the activated charcoal filter system

  • Knock sensor 1 (G61)
    • ◆ Engine codes ADX, AEA only
    • ◆ =>Page 28-4
  • Injection unit
  • Temperature regulator
    • ◆ For intake air preheating
  • Mono Motronic injection and ignition system control unit (J257)
 
N24-0131
  • Throttle valve positioner (V60) with idling switch (F60)
  • Connector
    • ◆ For injector and intake air temperature sender
  • Fuel pressure regulator
  • Injector (N181) with intake air temperature sender (G42)
  • Throttle valve potentiometer (G69)
  • Ignition transformer (N152)
  • Distributor
  • 4 pin connector
    • ◆ For Lambda probe (G39)
  • Central connector
 
N24-0131
  • Coolant temperature sender (G62)
  • Earth connection
  • Spark plug, 25 Nm
  • Air cleaner
  • Activated charcoal filter
    • ◆ Activated charcoal filter system

=> Repair group 20, removing and installing parts of the fuel supply system, removing and installing parts of the activated charcoal filter system

Servicing injection part > < Mono-Motronic injection and ignition system