volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Test prerequisites > < Fault finding with fault reader V.A.G 1551 or tester VAS 5051 on ABS and ABS/EDL, ITT Mark 20 GI and ITT Mark 20 IE (flow chart)

Polo Mk3

Running gear self-diagnosis for ABS
Electrical check of ABS, ABS/EDL ITT Mark 20 GI and ITT Mark 20 IE
Electrical check of ABS, ABS/EDL ITT Mark 20 GI and ITT Mark 20 IE
 
W00-0560

Special tools and workshop equipment required

  • ◆ V.A.G 1598/21 Adapter
 
W00-0477
  • ◆ V.A.G 1594/ A Adapter set
 
W00-0431
  • ◆ V.A.G 1526 A Hand multimeter

The test steps from Page 01-185 are valid for:

  • ◆ For vehicles on which the self diagnosis does not give any indication of the source of the fault. Work through the complete electrical check.
  • ◆ For vehicles on which the self diagnosis provides a direct indication of the source of the fault. Only carry out the test steps recommended in the fault table (directed entry).

An overview of all the test steps in the electrical check can be found on Page 01-183 .

Test prerequisites > < Fault finding with fault reader V.A.G 1551 or tester VAS 5051 on ABS and ABS/EDL, ITT Mark 20 GI and ITT Mark 20 IE (flow chart)