volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Steering column switch and ignition/starter switch > < Removing and installing bulb carrier

Polo Mk3

Removing and installing additional brake light, Polo GTI 10.99 ▸
Removing and installing additional brake light, Polo GTI 10.99 ►
–  Remove rear spoiler → General body repairs, exterior; Rep. Gr.66.
–  Unclip and disconnect connector for additional brake light.
   
–  Remove Torx screws -arrows- and remove additional brake light from spoiler.
  Note
The bulb carrier and the additional brake light are one unit.
The installation of the additional brake light is carried out in the reverse sequence.
  N94-0442

Steering column switch and ignition/starter switch > < Removing and installing bulb carrier