| –
| Disconnect connectors -1- of H7 halogen bulb (12 V/55 W). |
| –
| Unclip retaining clip -2- over retaining lugs -3- and swing out. |
| –
| Pull bulb out of housing. |
| Installation is carried out in the reverse order. When installing observe the following: |
Note | Do not touch glass envelope when fitting a new bulb. Fingers leave traces of grease on the glass envelope, which evaporate when the bulb is switched on and cause the glass envelope to cloud over. |
| –
| Insert bulb so that recess in bulb carrier aligns with guide lug of housing. |
| –
| Check fog light settings and adjust if necessary → Booklet. |
| –
| Check function of headlight. |
|
|
|
