volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Transmitted output and aerial fitting locations > < Notes on performing repair work
Radio, telephone, navigation
Notes for mobile telephone and two-way radio operation
Overview of battery, transmitter/receiver unit, fuse and wiring harness
 
N91-0438
  • Positive connection
    • ◆ Red wire with suitable connection.
  • To terminal 15a
    • ◆ Connection to terminal 15a:

=> Current flow diagrams, Electrical fault finding and Fitting locations binder

    • ◆ Ensure this wire is protected by a fuse.
    • ◆ Fuse protection max. 15A
  • Aerial earth
    • ◆ Ensure correct earth connection to body.
    • ◆ The aerial location must be treated with suitable corrosion protection.
 
N91-0438
  • Transmitter/receiver aerial
    • ◆ Fitting locations: => table page 01-30 .
  • Screened aerial wire
    • ◆ Wire with coaxial connector
  • Telephone or two-way radio transmitter/receiver unit
  • Wiring harness
    • ◆ Voltage supply positive via red wire 2.5 mm cross section.
    • ◆ Voltage supply negative via brown wire 2.5 mm cross section.
    • ◆ If necessary, wire to terminal 15a via black wire 1.5 mm cross section.
  • Fuse holder
    • ◆ Fit next to battery.
 
N91-0438
  • To starter
  • Battery
    • ◆ Fitting location: in front left engine compartment.
  • Negative wire
  • Body earth

Transmitted output and aerial fitting locations > < Notes on performing repair work