Hood cover damper - destroy for disposal |
–
| Fasten the damper in zone x = 50 mm on the bench vise. |
WARNING It can only be fastened in this area, otherwise there is risk
of accident! |
|
–
| Cut the damper cylinder in the first third of the total
length of the cylinder, splitting the reference edge of the rod side
of the plunger. |
Note t
| Use protection goggles during the cutting process. |
t
| Cover the cutting area with a cloth to collect oil splashes. |
t
| Oil and pieces of cloth must be eliminated. |
|
|
|