Works on vehicles with belt tensioner |
WARNING Before starting repair or alignment works, you should remove
the mechanically triggered belt tensioners without usage identification
(trigger locking). On electrically-triggered belt tensioners, the
battery earth cable must be disconnected. |
|
Note If the belt strap is completely retracted, the usage identification
(trigger lock) prevents the actuation of the mechanically triggered
tensioner in case of an accident. |
WARNING During repair or alignment works, the belt strap may not be
pulled on the tensioners with usage identification. If larger vibrations
are caused, during separation, alignment and unwrinkling works, then
the belt tensioner with usage identification must also be removed. |
|
|
|
|