Polo Mk4
| Engine compartment partition panel - assembly overview |
Note| The engine compartment partition panel -1- is fastened also with polyurethane adhesive (PU) -3-. |
| 1 - | Engine compartment partition panel |
| q | remove: |
| – | After the screws are removed -2-, cut the adhesive cord. |
| 2 - | Screw |
| q | 8 units |
| q | 25 Nm |
| 3 - | Polyurethane adhesive - PUR |
| q | cord profile: -a- = 11 mm, -b- = 8.5 mm and -c- = 7 mm |
| q | minimum drying time → Chapter |
