Polo Mk4
| Fuel reservoir nozzle compartment and lid set (hatch) - remove and install |
| 1 - | Fuel reservoir nozzle compartment and lid set |
| q | composed by the set comprised of lid → Item and fuel nozzle small door compartment → Item. |
| q | remove: |
| q | Remove the fuel reservoir nozzle lid. |
| q | Disengage the opening mechanism → Item and remove the opening mechanism. |
| q | Remove the screws → Item. |
| q | Remove the rubber part of the reservoir filling nozzle and remove the fuel reservoir nozzle compartment and lid set from the side panel. |
| q | install: |
| The assembly part and the adjustment element are assembled |
| q | First, assemble the fuel reservoir nozzle compartment and lid set from the hinge side. |
| q | Fasten the fuel reservoir nozzle compartment and lid set and the assembly part. |
| 2 - | Fuel reservoir lid |
| q | can only be removed with the fuel reservoir nozzle compartment and lid set → Item. |
| q | to remove fuel reservoir lid, press the fuel reservoir nozzle compartment fastening pin outwards. |
| 3 - | Opening mechanism |
| 4 - | Screw |
| 5 - | Fuel nozzle small door compartment |
| q | can only be removed with the fuel reservoir nozzle compartment and lid set → Item |
| q | To remove fuel reservoir lid, it is necessary to remove the fuel reservoir nozzle compartment fastening pin. |
| 6 - | Flow pipe |
| 7 - | Side panel |
| 8 - | Unblocking pin |
| 9 - | Reservoir lid locking motor |
| q | Assembly location: Pillar C |
| q | Remove: with the hexagonal wrench 3 mm -T 10010- |
| 10 - | Sealing packing |
| 11 - | Unblocking pin guide |
| q | It is inserted on the lateral part. |
