Polo Mk4
Fuel reservoir nozzle compartment and lid set (sedan) - remove and install |
1 - | Fuel reservoir lid positioning element |
2 - | Eyelet |
3 - | Unlocking support |
q | is fitted to the lateral part |
4 - | Fuel reservoir lid set |
q | Comprised by reservoir lid -5- and reservoir lid compartment |
q | Remove: |
q | Unthread the reservoir lid |
q | Unlock the pre-locking mechanism tab - → Item- and pull the pre-locking mechanism outward. |
q | Unthread the screw - → Item-. |
q | Extract the rubber bellows from the tank filling nozzle and remove the reservoir nozzle case lid from the side panel. |
5 - | Reservoir lid |
q | it is only possible to remove it by removing the fuel reservoir lid set - → Item- |
q | To remove the reservoir lid, you must remove the reservoir lid fastening pin. |
6 - | Screw |
7 - | Unlocking mechanism |
8 - | Fuel reservoir lid housing |
q | it is only possible to remove it by removing the fuel reservoir lid set - → Item- |
q | to remove the reservoir lid, you must push the reservoir nozzle case lid fastening pin outwards. |
9 - | Flow hose |
10 - | Side panel |