Polo Mk4
| Rear door lock (with central locking) - remove and install |
| 1 - | Cylinder housing of lock with symbol |
| q | Remove and install → Chapter |
| 2 - | Lock |
| q | remove: |
| q | Remove the door lining → Body - Internal assembly works; Rep. Gr.70 |
| q | Disconnect the harness from the boot lighting switch -F5- |
| q | Disengage the operating rod - → Item- in the lock, remove the nuts - → Item- and remove the door lock. |
| 3 - | Nut |
| q | 7 Nm |
| 4 - | Engine for unblocking the rear door -V139- |
| q | remove: |
| q | Remove the door lining → Body - Internal assembly works; Rep. Gr.70 |
| q | Disconnect the electric connectors in the motor for unblocking. |
| q | Disconnect the operating rod - → Item-. |
| q | Unthread the nuts - → Item-. |
| q | Remove the fastening screws from the motor for unblocking |
| 5 - | Nut |
| q | 7 Nm |
| 6 - | Operating rod |
| 7 - | Screw |
| q | 4 Nm |
| 8 - | Support |
