Polo Mk4
| Rear wheel case protector - remove and install |
| 1 - | Rear wheel case protector |
| q | PP/EPDM material |
| q | remove: |
| q | remove the wheel. Tightening torque for wheel screws → Running Gear; Rep. Gr.44 |
| q | remove the Torx screws -3- (11 units) and remove the rear wheel case protector. |
| 2 - | Expansion nut |
| q | 2 units |
| 3 - | Torx screw |
| q | 11 units |
| q | 1.5 Nm |
| 4 - | Expansion nut |
| q | 5 units |
