volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Lock - remove and install > < External door handle - remove and install|Remove
Install
   
Install

–  Through the opening in the door panel, insert the hook -T 10118- in the door.
–  For better vision, illuminate the internal section of the door with a lamp.
–  Fasten the hook to the spring -arrow A-.
   
–  Pull the hook-arrow B-, fasten the spring to the door lock.
–  Install the hinge in the door.
–  Pull the clip -1- through the plate cut and fit to the door handle -2-.
  Note
During the assembly, the door handle -2- must be pressed against the door panel.
–  Install the latch cylinder → Chapter.
l  Check the handle operation before closing the door, otherwise, the door will not open.
  N57-0214

Lock - remove and install > < External door handle - remove and install|Remove