volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Front door window - adjust > < Front door window - assembly overview

Polo Mk4

Front door window - remove and install
Front door window - remove and install
Remove
   
–  Remove the front door lining → Body - Internal assembly works; Rep. Gr.70.
–  Remove the rubber plugs -1-.
–  Lower the window glass, until the fastening screws -2- from the tightening jaws are accessible.
  Note
If the window drive mechanism motor is not operating, preventing the door window from being lowered, remove the electric motor so the window lowers.
  N57-0403
–  Loosen the screws -2- and separate the tightening jaws.
–  Hold the internal door packing -1- with pliers -2-. Then, move the pliers in the direction of the arrow and, at the same time, pull the internal door packing -1- upwards, to remove the door flange packing.
  N57-0428
–  To facilitate the removal of the internal door packing, the pliers can be supported with the wedge -3409--3-.
–  Raise the rear section of the door window and move it forward, in direction of the arrow, to remove it from the door.
Install
–  Installation is performed in the reverse removal sequence.
–  Adjust the door window → Chapter.
  N64-0289

Front door window - adjust > < Front door window - assembly overview