volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Air deflector - remove > < Cover packing - adjust

Polo Mk4

Cover packing - replace
Cover packing - replace
   
–  Remove the sliding / tilting sunroof glass pane → Chapter.
–  Pull the packing -1- from the glass pane -2- towards the arrow on the rear edge of the glass pane, by starting in the middle.
–  Remove all the adhesive residues from the glass pane edge.
  N60-0143
–  Apply the primer that is supplied with the sealing kit -6N0 898 209-, by using the applicator -D 009 500 25--1- around the whole contour of the gluing surface.
  N60-0156
–  Remove the protective plastic by pulling gradually the gluing surface of the new packing, and glue the packing in the middle of the rear edge of the glass pane.
  N60-0157
–  The new packing on cover -1- must align perfectly with the glass pane upper edge -arrow-.
–  The cover packing must be cut so to adjust it to the cover perimeter.
–  Then, press firmly the new packing with the pressure roller -3356-.
–  Adjust cover packing → Chapter.
–  Remove the sliding / tilting sunroof glass pane → Chapter.
  N60-0144

Air deflector - remove > < Cover packing - adjust