| Accident with airbag triggering |
| The following components should always be replaced: |
| t
| All the fired airbag ignition devices with their command units
and sensors. |
| t
| Supports of the Ignition device 1 for the front passenger
airbag -N131-. |
| t
| Airbag coil connector and return spring with sliding
ring -F138-. |
| t
| All safety belts with triggered pre-tensioner. |
| Visual inspection - replace it if necessary: |
| t
| All the damaged components. |
Note | After the repairs have been completed, even if the Airbag control lamp -K75- does not indicate any
failure, the airbag component damage memory must be checked using
the Diagnosis, Measurement, and Information System -VAS 5051- or Diagnosis, Measurement and Information
System -VAS 5052- or later equipment or Diagnosis, Measurement and Information System -VAS 5052- or later equipment . |
|
|
|
