–
| Turn the steering wheel until its horizontal spokes are
in the vertical position. |
–
| Pull the steering column completely outwards and block it
in the lower position. |
–
| Insert a screwdriver with approximately 5 mm width from
the rear side, in the steering wheel hole, and press it according
to the -arrow-. |
–
| Turn the steering wheel to (180° right) and unlock the second
locking. |
Caution The electrostatic discharges can cause an involuntary firing
of the airbag. That's why the assembler should perform the electrostatic
discharging before connecting the ignition cable and the mass cable.
This can be done, for instance, by touching the vehicle's door
lock stop. |
|
–
| Carefully remove the Driver's airbag ignition
device -N95-, pulling it a little a little away
from the steering wheel. |
|
|
|