volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Trigger 1 for front passenger's airbagN131- remove and install|Installation > < Trigger 1 for front passenger's airbagN131- remove and install

Polo Mk4

Removal
Removal
–  Turn ignition off.
  Caution
The electrostatic discharges can cause an involuntary firing of the airbag. That's why the assembler should perform the electrostatic discharging before connecting the ignition cable and the mass cable. This can be done, for instance, by touching the vehicle's door lock stop.
–  Disconnect the battery's mass cable → Electrical equipment ; Rep. gr.27.
–  Remove the instrument panel → Chapter.
   
  Caution
Observe the safety measures to work with the Airbag → Chapter.
–  Disconnect the connector -3-.
–  Remove fastening screws -2-.
–  Remove the Ignition trigger 1 for front passenger's airbag -N131--1- from the instrument panel.

   

Trigger 1 for front passenger's airbagN131- remove and install|Installation > < Trigger 1 for front passenger's airbagN131- remove and install