volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

safety belt with pre-tensioner|Removal > < Assembly overview
Remove and install
Remove and install
Special tools and workshop equipment required
   
t  Torque wrench 2 to 10 Nm -VAG 1783-
  W00-0990
t  Torque wrench - 40 to 20 Nm (enc. 3/8") -VAG 1410-
  W00-0554
t  Torque wrench - 5 to 50 Nm (fit. 1/2") -VAG 1331-
  WARNING
Follow the safety rules for pre-tensioners → Chapter.
  Note
The removal and installation is described for the left safety belt. The removal and installation for the right safety belt is made in an analogue manner.
  WARNING
Before making any work in the electric system, it is necessary to disconnect the battery's mass cable.
→ Electrical system; Rep. gr.27.
Before starting any body repair, remove the pre-tensioner units from the safety belts.
  Note
t  Check if the vehicle has a coded radio, if so, request the anti-theft code before disconnecting the mass cable from the battery.
t  When reconnecting the battery, check if the vehicle's equipment (radio, clock, electric locks, electric windows, etc.), according to the repair guide and/or instructions of use.
  W00-0427

safety belt with pre-tensioner|Removal > < Assembly overview