| Automatic rewinder (blocking effect) - checking |
| The belt's automatic rewinder has two blocking
functions: |
| The first blocking function is activated when
the belt is quickly pulled from the automatic rewinder (acceleration
of the belt's unwinding). |
| –
| Pull the belt, strongly, out of the automatic rewinder. |
| If no blocking is found - replace the full safety belt with
its fastening. |
| If there are fails unwinding and winding the belt, it is necessary
to check first if the automatic rewinder position is changed. |
| The second locking function operates when a sudden
change is noticed in the vehicle movement (vehicle-dependent locking
function). |
| –
| Fasten the safety belt. |
| –
| Accelerate the vehicle until reaching the (20 km/h) speed
and press the brake pedal strongly. |
| If, during braking, the blocking system does not work, it
is necessary to replace the full safety belt with the fastening. |
Caution | For safety reasons, the test drive should be made in a street
without movement, in order not to expose other drivers to the danger. |
|
|
|
|
