volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Locking devices > < General repair instructions|Gearbox
Gaskets, sealing rings
Gaskets, sealing rings
t  Thoroughly clean joint surfaces and apply sealant AMV 188 200 03.
t  Apply sealant uniformly but not too thick.
t  Renew O-rings.
t  Radial shaft oil seals.
Before installing
   
Lightly oil outer edge, half-fill space between sealing lips -arrow- with grease “G 052 128 A1”.
After installation
Check oil level; if necessary top-up to lower edge of oil filler hole, specification → Chapter.
  N32-0001

Locking devices > < General repair instructions|Gearbox