–
| Slide assembly bell housing -A- in direction of arrow by hand until the sender wheel -B- (sealing lip support ring for PTFE sealing ring) lies against the crankshaft flange -C-. |
Note The assembly appliance guide pin -D- is guided into threaded hole in crankshaft during the fitting sequence. This ensures that the sender wheel reaches its final installation position. |
–
| Hold assembly bell housing in this position and screw both assembly appliance hexagon socket head bolts hand tight. |
–
| Screw hexagon nut -E- onto threaded spindle by hand until it lies against the assembly bell housing -A-. |
|
|
|