| –
| Lift lifting device 2024 A as follows and remove it from Engine-/gearbox jack -V.A.G 1383/A-, with hydraulic hoist. |
| Belt pulley side: 4. hole of drilled rail in position 2 |
| Steering wheel side: 3. Drilled rail hole in position 8 |
WARNING | Use locking pins on fastening hooks and pins. |
|
Note | t
| Aligning positions marked from 1...4, on support bar, must be turned to belt pulley. |
| t
| Holes on drilled ducts are counted from the hook |
| –
| Fasten engine with Engine and gearbox support -VW 540- to assembly anvil Support clamp -VW 313-. |
|
|
|
