WARNING | For all assembly jobs, especially those performed on the engine compartment, please pay attention to the following: |
| t
| All hose types (for fuel, hydraulic system, coal filter, cooling fluid and gas, brake fluid, vacuum) and all wiring harnesses must be installed in such a way that original positions are restored. |
| t
| Ensure there is enough free space in relation to all mobile or heated parts. |
|
| If a test drive requires test and measurement equipment, the following must be observed: |
| t
| Checking and measurement equipment must always be installed on rear seat and be handled by a second person. |
| If checking and measuring equipment is installed on the passenger seat, an opening of the passenger airbag, in case of an accident, may injury the person seating there. |
| To avoid personal injuries and/or injection and pre-heating equipment damages, do the following: |
| t
| Disconnect and connect measurement equipment injection and pre -heating system cables and wires with ignition off. |
| t
| If it is necessary to start engine without turning it on, for compression presuure checking, for example, disconnect plug to the unit-pump-head injector |
| t
| Before disconnecting battery, in case of radios with anti-theft codes, request password. |
| t
| Battery disconnection and connection must only be performed with ignitoin off, otherwise the diesel direct injection system command unit may be damaged. |
|
|
|
