–
| First, check whether a code radio equipment is installed. If so, request respective anti-theft password. |
–
| Disconnect battery ground cable with ignition off. |
–
| Remove fuel pump unit cover |
–
| Remover 4-pin connector and flange supply and return hoses. |
Note To do so, press hose connectors keys. |
WARNING t
| Fuel, as well as fuel tubes, may become very hot (danger of burn injury)! |
t
| The fuel system is also under pressure! Before opening system, place a cloth over connector and carefully loosen it, to relieve pressure! |
t
| For all the assembly jobs in the fuel system, wear goggles and protection gloves! |
|
|
|
|