| Continuation of installation |
| –
| Tighten the vibration absorber/pulley. Tightening torque: 25 Nm. |
| –
| Install mechanical distribution centre cover. |
| –
| Install the engine support in the engine block. Tightening torque 50 Nm. |
| –
| Completely install the engine assembly cushions. |
Note | Tightening torque for the subframe pads → Chapter. |
| –
| Remove the Bracket or VW 061 -10-222A-. |
| –
| Install the upper protection of the mechanical distribution. |
| –
| Install the tensioning element for the Poly-V belt. Tightening torque: 25 Nm. |
Note | When installing Poly-V belt, ensure the proper seating of the belt on the respective pulleys. |
| –
| Install coolant reservoir. |
|
|
|
