General instructions regarding the ignition system |
t
| A minimum voltage of 11.5V is necessary for the perfect operation
of electrical components. |
t
| In some tests, the Engine control unit -J623- may detect and record a fault. Accordingly, once all tests and
repairs are complete, check the event memory and erase it if necessary → Chapter. |
t
| If after troubleshooting, repair and component checking, the
engine starts for a moment and stops, the immobilizer may be blocking
the Engine control unit -J623-. In this
case, check the event memory and, if necessary, adjust the Engine control unit -J623- → Chapter. |
|
|
|