- Running gear
- Body
- Engine
- 4-cylinder injection engine
- 4 - Cyl. injection engine (4-valve, rolling rockers)
- Technical data
- Engine assy,cylinder block,crankcase
- Enginecrankshaft group, pistons
- Engine cylinder head, valve gear
- Head - disassemble and assemble
- Distribution times - check
- Tension pulley of indented belt - check
- Indented belt - remove and install, adjust
- Head cover - remove and install
- Head - remove and install
- Assumptions
- Removal
- Remove head
- Installation
- Install head
- Compression - check
- Valve command - repair
- Valve seats - grind
- Valve stem seal - replace
- Engine lubrication
- Engine cooling
- Fuel supply, gas operation
- Mixture preparation system, electronic inj.,Gas
- Exhaust system
- Ignition system, glow plug system
- 4 - Cyl. diesel engine (with distributor injection pump)
- 4 - Cyl. diesel engine (with unit injectors)
- 4 - Cyl. injection engine
- Vehicle electrics
- Power transmission
- Heating, ventilation, air conditioning
- Clutch and gearbox