| –
| Align pin -1- with hole -3- and pin -4- with hole -2-. |
| –
| Start ignition and check operation of the Control
motor for fresh air valve and recirculation valve -V154- with the air circulation button. |
Note | t
| The small cold air door and the circulation air door must move
freely and with no jerking movements until their final positions. |
| t
| Turn the ignition off immediately if the system malfunctions
and repeat the installation. |
| –
| Check the operation with the Diagnosis, Measurement
and Information System -VAS 5051A/52- → Chapter. |
|
|
|
