volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
For vehicles with condensers ((8/01/2006 ?) > < Condenser - remove and install

Polo Mk4

For vehicles with condensers (► 7//312006)
For vehicles with condensers (► 7//312006)
Removal:
   
–  Connect the Climate control recovery, recycling and refill set or VAS 6008 -EQ 7098- or similar equipment to the service valves -arrows- in the cooling gas loop and aspirate all the gas → Air conditioning with R134a cooling gas; Rep. gr.00.
  Note
t  Contaminating the environment with refrigerant is a punishable offence.
t  All refrigerant circuit components that are open must be closed with proper plugs to prevent humidity from entering them.
–  Remove front bumper → Body - External assembly work; Rep. gr.63.
–  Remove front end → Body - External assembly works; Rep. gr.50.
–  Release and close the refrigerant hoses along with the condenser.
  R87-10011
–  Remove the fastening screws -arrows-.
–  Remove condenser.
Installation:
The installation occurs in the reversal sequence of removal, observing the following instructions:
–  Screw on the fastening screws -arrows- with torque of 5 Nm.
  R87-10013

For vehicles with condensers ((8/01/2006 ?) > < Condenser - remove and install