volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Left propelling flange retainer - replace|Installation > < Left propelling flange retainer - replace

Polo Mk4

Removal
Removal
–  Remove left side wheel.
–  Remove the noise insulation
–  Turn the steering wheel to the left stop.
–  Remove drive semi-shaft from left transmission propelling flanges → Running gear, axles, steering; Rep. Gr.40.
   
–  Mark the installation position of the screws -arrows-.
–  Remove the screws -arrows- → Running gear, axles, steering; Rep. Gr.40.
–  Remove coupling rod -1- out of anti-roll bar, if applicable → Running gear, axles, steering; Rep. Gr.40.
–  Place the drive semi-shaft upwards and fasten it with wire on the suspension pillar.
  N39-1020
–  Remove the propelling flange fastening screw by using two screws to lock the flange with a lever.
–  Place a Tray for oil collection - VAG 1306- under the transmission.
–  Remove the propelling flange with the spring.
  V34-2737
–  Remove the propelling flange retainer with the Bush and bearing puller -VW 771- and the Complement -VW 771/37-.
  A39-0331

Left propelling flange retainer - replace|Installation > < Left propelling flange retainer - replace