| t
| Loosen and tighten cover and case fastening screws or nuts in a cross and phased pattern. |
| t
| The tightening torques indicated apply to non-oiled screws and nuts. |
| t
| The screw threads with locking paste must be cleaned with wire brush. Install screws with Locking paste -AMV 185 100 A1-. |
| t
| All the self-locking screw holes must be cleaned from locking paste residues with screw tap. Otherwise, there is the risk of breaking the screws when they are removed again. |
| t
| Always replace self-locking screws and nuts. |
|
|
|
