volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Hydraulic pump installed on the upper part - assembly overview > < Hydraulic pump installed on the lower part - remove and install|Removal

Polo Mk4

Installation
Installation
–  Fill the hydraulic pump with hydraulic oil. Introduce oil through the pump intake nozzle.
–  Manually turn the hub until oil comes out from the pressure side.
–  Install hydraulic pump on support and tighten screws. Tightening torque, see → Item.
   
–  Insert the intake tube and install the clamp. The mark -arrow A- must align with the seam -arrow-. Clamp must be parallel to (facing) marking -arrow B-.
–  Install the new sealants over the hollow screw.
–  Install and tighten the hollows bolt. Tightening torque, see → Item.
–  The rest of the installation is processed in the reverse order from removal.
  A48-0142

Hydraulic pump installed on the upper part - assembly overview > < Hydraulic pump installed on the lower part - remove and install|Removal