volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Hydraulic pump installed on the upper part - remove and install|Removal > < Hydraulic pump installed on the upper part - assembly overview

Polo Mk4

Hydraulic pump installed on the upper part - remove and install
Hydraulic pump installed on the upper part - remove and install
  WARNING
Repair works in the hydraulic pump are not expected.
   
Special tools and workshop equipment required
t  Clamp Pliers -VW 5163-
t  Clamps (diameter 25 mm) -3094-
t  Poly-V pulley locking rod -EQ-7112-
t  "Torque wrench - 5 to 50 Nm (enc. 1/2")" -VAG 1331-

or
   
t  Pliers or Hazet 790-1 -VW 5024-

  Note
t  Replacement pumps are not filled with oil. Therefore, before proceeding with the respective installation, fill with Hydraulic oil -325 029 011- and turn manually. Otherwise, there may be noises during the operation or damages to the pump
t  Amount of oil in the system: 0,7 ... 0,9 l
   

Hydraulic pump installed on the upper part - remove and install|Removal > < Hydraulic pump installed on the upper part - assembly overview