Volkswagen Workshop Service and Repair Manuals > Polo Mk4 > Vehicle electrics | Communication | Infotainment | "CD player"R89 | "CD player"R89 "2 Din MID" - 02/08? | CD playerR89"2 Din MID"

CD playerR89„2 Din MID“ - remove and install

CD player -R89-„2 Din MID“ - remove and install

Special tools and workshop equipment required

t	Key -T 10057-

Removal:

–	Turn off the ignition, all the electrical devices, and remove the key from ignition.

–	Remove the CD, if any, from the equipment → Radio Instruction Manual.

–	Insert the Key -T 10057- into the equipment sides -arrows- until they fit.

–	Remove the "CD Player" -R89-„2 Din MID“ from the dash by pulling it with the Screwdriver -T 10057- in the direction of the -arrows-.

–	Pull the equipment out of its housing until the you can reach the connectors in the rear part.

–	Detach the connectors and remove the cable for the Antenna -R11-.

–	After removing the equipment, remove each Key -T 10057- by pressing the lock -arrow-.

Installation:

–	Connect the connectors for the "CD player" -R89-„2 Din MID“ and the Antenna -R11-.

–	Install the "CD player" -R89-„2 Din MID“by pushing it inside the housing in the dash until it fits in completely.

Note

During installation, never press the display nor the command keys; otherwise, the equipment may be damaged.

–	If necessary, activate the electronic anti-theft alarm system → Chapter

Volkswagen Workshop Service and Repair Manuals