| "CD player" -R89-„RCD 200“ - anti-theft system |
| The "CD player" -R89-„RCD
200“ is equipped with an electronic anti-theft system. |
| After the electronic anti-theft system is activated for the
first time, an internal code is memorized on the vehicle's radio
and combined instrument. If, during the repair works, the "CD player" -R89-„RCD 200 “ radio
experiences a power outage (for example, when removing the radio or
the battery), data is exchanged between the radio and the combined
instrument after the supply voltage is reestablished. |
| This way, the comparison between the internal radio code and
the combined panel is performed. If the code is identical, the combined
instrument recognizes that the "CD player" -R89-„RCD 200“ installed belongs to the vehicle, and
the radio becomes operational without the need for entering the anti-theft
code. |
Note | t
| Each "CD player" -R89-„RCD
200“ has its own code. |
| t
| The anti-theft system code is glued to the "CD player" -R89-„RCD 200“ card along with the equipment
ID number → Radio Instruction Manual. |
| t
| For safety reasons, the "CD player" -R89-„RCD 200“ card should not be kept inside the vehicle.
If necessary, request the code from the client. |
| t
| If a "CD player" -R89-„RCD
200“ is replaced, the replacement equipment code must be used. |
| t
| The customer must be informed that the code number was changed. |
| The electronic anti-theft system starts operating and blocks
the radio whenever: |
| t
| the Battery -A- is disconnected. |
| t
| the "CD player" -R89-„RCD
200“ is removed from the vehicle. |
| t
| the Combined instrument -K- is
replaced. |
|
|
|
