Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Additional brake light lamp support (version 1) - remove and install >
< Additional brake light (Hatch)
Polo Mk4
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Additional brake light / ditional_brake_light_(hatch)/">Additional brake light (Hatch)
Additional brake light (version 1) - remove and install
Additional brake light (version 1) - remove and install
Additional brake light (version 1) - remove and install
Removal:
–
Turn off the ignition and all electrical equipment, and remove the key from ignition.
–
Disconnect the Battery -A-
→ Chapter
.
–
Remove the rear door upper and lower linings
→ General body repairs, interior; Rep. gr.70
.
–
Remove the fastening screws
-arrows-
(1.5 Nm) on the additional brake light.
–
Carefully move the additional brake light lamp upwards.
–
Disengage the connector
-arrow-
and remove the additional brake light.
Installation:
Installation is performed in reverse sequence to the removal, considering the following:
–
Screw on the fastening screws
-arrows-
with torque of (1.5 Nm).
–
After installation, check the additional brake light operation.
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Additional brake light / ditional_brake_light_(hatch)/">Additional brake light (Hatch)
Additional brake light (version 1) - remove and install
Additional brake light lamp support (version 1) - remove and install >
< Additional brake light (Hatch)