volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Number plate lightX (Sedan) - replace the lamp > < Number plate lightX (Hatch) - replace the lamp

Polo Mk4

Number plate light (Sedan) - remove and install
Number plate light (Sedan) - remove and install
Removal:
–  Turn off the ignition and all electrical equipment, and remove the key from ignition.
–  Disconnect the Battery -A- → Chapter.
   
–  Remove the fastening screws -arrows-.
–  Disengage the tail light carefully, and release its connector.
–  Remove the lamp from the rear lid.
Installation:
Installation is performed in the reverse sequence to the removal, considering the following:
–  Fasten the fastening screws-arrows- (1.5 Nm).
–  After installing, check the number plate light functioning.
  N94-0141

Number plate lightX (Sedan) - replace the lamp > < Number plate lightX (Hatch) - replace the lamp