To avoid accident risks, always disconnect first the terminal
connected to the negative pole of the Battery -A-.
–
Turn off the ignition and all electrical equipment, and
remove the key from ignition.
–
Using the lever -arrow-, disconnect the
fuse holder -2-, releasing it from the locks -1-.
–
Move the fuse holder cover -2- up.
–
Pull laterally the safety tabs -2- from
the fuse holder -1- in direction of the arrows, in
order to release the fuse holder from the tray -3- of the Battery -A-.
–
Move the fuse holder to the side up to the limit of the
positive wire of the Battery -A-.
–
Loosen the securing nut -1- on the negative
terminal -2- and remove it from the Battery -A-.
–
Loosen the securing nut -3- on the positive
terminal -4- and remove it from the Battery -A-.