volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Remove the BatteryA (Version 2). > < Remove the BatteryA (Version 1).

Polo Mk4

Install the BatteryA (Version 1).
Install the Battery -A- (Version 1).
  Note
The differences between Batteries -A- will be reduced through a floor frame adapter, as well as a ventilation cover for degassing. The instructions for installing the ventilation cover for degassing and the floor frame adapter are provided together with the Battery -A-.
   
–  Install the Battery -A- so that the base frame fits below the support projections -arrows- of the Battery -A-tray.
  N27-0279
The Battery -A- is properly installed when the central slot (recess) in the Battery -A- base is aligned with the threaded hole in the Battery -A- support -arrows-.
–  In Batteries -A- with flexible tube for central degassing, pay attention so the flexible tube is not disconnected. This is the only way the Battery -A- can be freely degassed.
  N27-0110
–  In Batteries -A- without flexible tube for central degassing, make sure that the opening on the upper cover section is not clogged.
–  Install the fastening handle -2- and tighten the fastening screw -1- with the specified torque → Chapter.
–  Connect the Battery -A- → Chapter.
  R27-10114

Remove the BatteryA (Version 2). > < Remove the BatteryA (Version 1).