| Charging a single Battery -A- or „rapid charging“ |
| –
| Connect the Battery -A- to the
charger. |
| –
| Set the charger to a voltage of 16 V, if possible. |
| –
| Set the charger to maximum current. |
WARNING | Monitor the charging procedure attentively. |
| l
| Leaking, emanation of gas from vents or over-heating (above
52º C) should not occur. If such things do occur, reduce the charging
rate (current). |
| l
| Monitor the inspection window on the battery. If a green color
appears and remains, the charge is sufficient for the Battery -A- to be tested. |
|
|
|
|
