| In vehicles equipped with front traction, due to high effort
of the front wheels, an accentuated wear can be noticed on the front
axle wheels. |
| In order to keep the same useful life on the 4 tyres of the
vehicle, we recommend the change of the front wheels backwards and
vice versa. |
| Pay attention to the rolling direction of the tyre, because
it cannot be reversed. |
| As the tyre rolls in the same position, it adjusts and, therefore
it is recommendable the change of the wheels at short intervals, for
example, every 5,000 km. |
| Only in case of tyres without rolling direction it is possible
to change the tyres diagonally. This change of tyres represents an
additional advantage in case of saw teeth build-up → Chapter. |
| If the saw teeth build-up is great, and the tyre tread is
more than 50% worn out, only a little improvement will be possible
and the change will not be worth. The elasticity of the profile blocks
reduces and the saw tooth increases. |
|
|
|
