Polo Mk5
| Assembly overview - plenum chamber bulkhead |
| 1 - | Plenum chamber bulkhead |
| q | Removing: |
| – | Removing plenum chamber cover → Chapter. |
| – | Components that are fastened to the plenum chamber bulkhead must be detached. |
| – | Remove insulation. |
| – | Remove bolts -2-. |
| – | Twist plenum chamber bulkhead upwards out of the plenum chamber -4-. |
| 2 - | Bolt |
| q | Qty. 8 or 10, depending on the type |
| q | Specified torque: 8 Nm |
| 3 - | Plenum chamber |
| 4 - | Seal |
Note| When installing plenum chamber bulkhead, ensure that seal is correctly seated. |
| 5 - | Insulation |
| q | Secured to bulkhead plenum chamber with clamping washers. |
| 6 - | Retainer |
| q | For securing insulation to bulkhead plenum chamber. |
