Polo Mk5
| Installing number plate carrier |
Note| t | Number plate carrier is not installed in all models or in all markets. |
| t | Number plate carriers of different sizes are fitted in various markets. |
| t | The height of the number plate carrier is specified by the contour to the bumper. |
| t | Adherence to a depth of 12 mm is required when drilling holes. |
| Holes exist |
| – | Position number plate carrier -5- on bumper and press clips -4- in. |
| – | Attach rivet nuts -3-. |
| If there are no holes |
| – | Align centre of number plate carrier -5- on bumper -1- with rear lid striker pin -2-. |
| – | Set drill depth stop to 12 mm and drill holes. |
| – | Position number plate carrier -5- on bumper and press clips -4- in. |
| – | Attach rivet nuts -3-. |
