Polo Mk5
| Removing adapter |
| l | Middle piece of roof edge spoiler already removed → Chapter |
| l | Side piece of roof edge spoiler already removed → Chapter |
Note| t | The adapter cannot be removed without damaging it and therefore it must be renewed always. |
| t | Installation is undertaken together with middle piece of roof edge spoiler → Chapter. |
| t | Clean dirt from all joints so that no paintwork is damaged when attached parts are removed. |
| t | Mask of adjoining paintwork using adhesive tape to prevent damage. |
| – | Position cutting cord -1- along side and under the adapter -A-, on the side that the side piece of the roof edge spoiler was removed. |
| – | Cut through adhesive sealant using pull handles -V.A.G 1351/1--2- and cutting cord -1-. |
| – | Release fastener to remaining side piece of roof edge spoiler -B- and remove adapter. |
