Polo Mk5
| Installing |
| – | Pull door handle -2- off door -8--arrow a-. |
| – | Push lock cylinder housing -1- into bearing bracket -3- at a right-angle -arrow b-. |
| – | Screw bolts -5 and 7- into bearing bracket. |
| – | Specified torque for bolts -5 and 7-: 3.5 Nm. |
Note| During installation, lock cylinder housing must be pressed against outer door panel. |
| Further installation is performed in the reverse order of removal. |
| l | It is essential that a functional check is then performed with the door open. |
