volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview - side window (4-door model) > < Assembly overview - side window (2-door model)

Polo Mk5

Removing undamaged side window (2-door model)
Removing undamaged side window (2-door model)
  Note
The removal and installation sequence is only for the left side window. The removal and installation of the right side window is similar.
   
–  Remove rear panel trim → General body repairs, interior; Rep. gr.70.
Protect surrounding parts against damage.
–  Using the awl -V.A.G 1474/2-, pull cutting cord -1- through the adhesive sealant at the place shown in the illustration.
–  Press seal aside so that it is not damaged.
  N64-10387
–  Insert cutting cord -3- behind seal in window flange with aid of tube -1-.
  N64-10388
–  Secure one end of cord -3- to pull handle -V.A.G 1351/1--2- to counterhold.
–  Pull other end of cord -2- through adhesive sealant as well.
–  Secure other end of cord to reel device -V.A.G 1654 A--3-.
–  Turn reel device -V.A.G 1654 A--3- accordingly and cut window free.
–  Press cutting cord against window glass with plastic wedge during cutting process, in order to have clearance at window flange.
  N64-10389
–  Instead of reel device -V.A.G 1654--3-, reel device -V.A.G 1654 A--3- can be used.
–  One suction cup can be removed from the reel device -V.A.G 1654--3- as shown in illustration. This ensures that the reel device -V.A.G 1654 A--3- roller can be guided closer to the window flange.
  N64-10408

Assembly overview - side window (4-door model) > < Assembly overview - side window (2-door model)