volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Installing > < Removing and installing door window
Removing
Removing
  Note
Removal and installation are described only for the right door window (2-door model). Removal and installation for the left door window and the 4-door model are similar.
   
–  Remove front door trim → General body repairs, interior; Rep. gr.70.
–  Lever off cap -5-.
–  Lift out cover -4-.
–  Lower door window -1- until clamping bolts -3- for door window are accessible.
–  Loosen bolts -3- (do not remove) and press clamping brackets -2- apart.
  Note
t  If work is not possible due to a malfunction caused by electric window regulator, window regulator motor -6- can be unbolted → Chapter.
t  Window can then be pushed to required working position.

   
–  Lift rear of door window -1- and swing out of window channels -2- forwards -in direction of arrow-.

   

Installing > < Removing and installing door window