Polo Mk5
Assembly overview - door hinges |
Note
t | The right side is shown. The left side is similar. |
t | The hinge bolts must always be renewed if loosened. |
1 - | Door |
q | Removing and installing → Chapter |
q | Adjusting → Chapter |
2 - | Multi-point socket head bolt |
q | 32 Nm |
q | Bolts must always be renewed after being loosened. |
3 - | Door hinge |
q | Upper part is bolted to lower part of hinge with bolt -4-. |
q | The hinge is split. |
4 - | Bolt |
q | This bolt must be removed from hinge to remove door |
q | 23 Nm |
5 - | Multi-point socket head bolt |
q | Installed from inside vehicle. |
q | Remove lower B-pillar trim → General body repairs, interior; Rep. gr.70. |
q | 32 Nm |
q | After renewing B-pillar, other specified torques must be observed → Chapter. |
q | Always renew bolts after loosening. |
6 - | Door hinge |
q | Lower part is bolted to upper part of hinge with bolt -4-. |
q | Hinge is split. |
7 - | Multi-point socket head bolt |
q | 32 Nm |
q | After renewing B-pillar, other specified torques must be observed → Chapter. |
q | Always renew bolts after loosening. |
8 - | Bolt |
q | 30 Nm |
q | Unscrew and remove this bolt to remove the door. |
9 - | Door arrester |
10 - | Bolt |
q | Qty. 2. |
q | 9 Nm |
q | For door arrester. |
11 - | Multi-point socket head bolt |
q | Installed from inside vehicle. |
q | Remove B-pillar trim → General body repairs, interior; Rep. gr.70. |
q | 32 Nm |
q | After renewing B-pillar, other specified torques must be observed → Chapter. |
q | Always renew bolts after loosening. |
12 - | Door hinge |
q | Lower part is bolted to upper part of hinge with bolt -16-. |
q | Hinge is split. |
13 - | Multi-point socket head bolt |
q | 32 Nm |
q | After renewing B-pillar, other specified torques must be observed → Chapter. |
q | Always renew bolts after loosening. |
14 - | Multi-point socket head bolt |
q | 32 Nm |
q | Bolts must always be renewed after being loosened. |
15 - | Door hinge |
q | Upper part is bolted to lower part of hinge with bolt -16-. |
q | Hinge is split. |
16 - | Bolt |
q | 23 Nm |
q | This bolt must be removed to remove door from hinge pin. |